3D de Proteus / Ares - RealWorld forums

how can i make fonction export 3DS "Save as 3D Studio file"
for 3D de Proteus / Ares

You will need to download a patch that allows to export in 3D Studio format for Proteus/Ares from here: 3DStudioExport.zip.
Here is how to install the patch:

• Go to the application installation folder and backup RWIconEditor.exe and RWDocument3DStudio.dll.
• Then replace them with the modified versions from the downloaded .zip.
• Start the application and open any .u3d file.
• Drag and drop the 3DSExport.rwcommand file to the first toolbar (the one with new, open, save, ... commands). A new icon should appear in the toolbar.
• When you click then new icon, a dialog appears and you may select

the level of detail for surface triangulation before saving.

Yesssssss thank so Mutch Now Its Working

I tried to follow Vlasta's advice but it was success only one time, all other attempts ended in application hangup.
What can be a reason of such trouble?
Do I have to perform such procedure each time I want to convert design to 3DS or the new toolbar icon will stays permanent after first attempt?

You should not need to repeat the whole procedure again as long as the updated configuration (with the new commands in toolbar) is saved. If the application crashed or if you have terminated it, then it was not saved and you'll need to add the button again.

It is hard to guess why it only worked once. Can you do a couple of tests with simple 3D models or by only exporting one model per session? Maybe a pattern will emerge...

hola Vladimir
fonction export 3DS "Save as 3D Studio file"
for 3D de Proteus / Ares
for 3DStudioExport.zip.
backup RWIconEditor.exe and RWDocument3DStudio.dll. this patch
is not work and give some error with upgrade
we need new patch for export 3DS "Save as 3D Studio file"

IMPORTANT: do not use this procedure with the latest version, it is not needed anymore. You'll find the export command in the Operation menu.

Yessssssss Okey I Have Finded and now Its Working
thank you

THANK FOR YOUR HELP! I WILL TRY TO ...

I HAVE A MODUL TO MAKE A RTC ? ANY ONE NICK IT?